HF Processors Advanced LabMaster Plus

Printer Friendly Version

Advanced LabMaster Plus 16/35 mm Silver (B/W) Film Processor

Dart Speed Controller for increased reliability and control
- Features “soft start” control, which allows speed to gradually increase from standing start
Microfilm processor-based temperature controllers
- Increased reliability and control for solutions

Continuous processing of 16 or 16/35 mm negative film up to 120 FPM
- Meets increased microfilm service bureau requirements for reliability and volume
- Capable of 60 rolls per hour
20% smaller footprint than comparable processors; requires less lab space
Worldwide product support backed by operation and maintenance training at our factory or your facility
Utilizes industry’s finest quality processing system: HF’s single-shaft demand drive, deep-tank processing, new speed controller and microfilm processor-based temperature controls
Lower maintenance per roll of film throughput than any comparable processor on the market
Durable stainless steel construction
Large load and take-up accumulators

Use of DART speed controller improves reliability and control
Soft Start feature allows processor to gradually increase the speed from standing start

Watlow temperature controllers provide excellent control over solution temperatures
Maintains developer and fixer temperatures to within ± 0.25ºF

Large load & take-up accumulators minimize operator errors and permit non-stop, continuous processing

Advanced LabMaster processor designed with a system approach to accommodate many key customer requirements
Compact footprint
Microfilm processor-based temperature controllers
Audible and visual alarm temperature indicators
Electronic speed control
“No-hassle” accumulator design
Splice break alarm
Low-film sensor alarm

The Crowley Company utilizes advanced CAD methods to efficiently produce reliable designs. With our combined 60 years of industry-recognized experience, this combination creates superb quality products which results in superior customer satisfaction.
Operation and maintenance manual and illustrated parts list provided in color and on CD-ROM

Film Type:	Black & white conventional negative
Film Sizes:	16 or 16/35 mm
Operation:	Daylight
Temperature:	Variable from 10 F (5.5C) above ambient
Film Load:	2000’ (610m) daylight magazine or dark
Output:	Variable (based on development time)
Construction:	216L stainless steel
Power:	115/230V or 120/208V, 60 Hz 220/240V, 50 Hz Note: Any power configuration can be accommodated per customer specification.
Wash:	Spray system. Water-saving solenoid or incoming water line is standard
Dimensions:	Width:	62 in	(1575 mm)
Dimensions:	Depth:	32 in	(813 mm)
Film Output	Developer Time	16mm	16/35 mm
	@45 sec	120 fpm (37 m/min)	60 fpm (18 m/min)
	@60 sec	90 fpm (27 m/min)	45 fpm (14 m/min)
	@75 sec	72 fpm (22 m/min)	36 fpm (11 m/min)
Power Consumption	30 AMPS
Water Requirements	5-7 gpm (19/26 liter/min)
Film Supply Change Time Available	40 sec @ 90 fpm (27m/min)
Process Cycle	Tank Capacity	Film Capacity (16 mm)	Film Capacity (16/35)
Developer	15 gal (57 liters)	90 ft (27 m)	45 ft (14 m)
Rinse	7.5 gal (28 liters)	45 ft (14 m)	22.5 ft (7 m)
Fixer	15 gal (57 liters)	90 ft (27 m)	45 ft (14 m)
Wash	22.5 gal (liters)	135 ft (41 m)	67.5 ft (21 m)
Dryer	N/A	106 ft (32 m) 56 ft (17 m)	56 ft (17 m)

2000’ load magazine (“A” load)
Film lock release (leader-load bracket)
(2) 2000’ take-Up reels (“X” take-up)
Hand stapler and staples
Water-saver solenoid on incoming water line
Splice separation alarm
ChemManager blending system
Water blender
Solution refrigeration system
Darkroom load operation
Spare parts kit
Operations and maintenance manual with illustrated parts list (hardcopy & CD-ROM)

For more information, call us at (240) 215-0224

For general inquiries and suggestions, please contact us.